This will help you ensure that no drips or runs are left on your deck boards and it’s also necessary for even coverage! It is recommended to use an HVLP (high volume low pressure) type of gun for best results.
When applying a stain with a sprayer, make sure to keep the nozzle moving constantly. Tip #7: Keep the Sprayer Moving to Avoid Drips and Runs Then apply a test area so you can see how the stain will look before applying it to all of your deck boards. Once you’ve cleaned it thoroughly, make sure that there is no debris on it either by checking with a broom or sweeping up loose particles after cleaning. Use a pressure washer and/or power scrub brush to remove dirt, grime, and moss from the surface of the wood. Make sure to clean your deck before applying any stains. Tip #6: Clean Your Deck and Do a Test Area First By doing so, you will avoid getting stains on other parts of your project that are more difficult to replace or repair after they have been stained.Īlso, make sure to apply two thin coats over bare wood instead of one thick coat for better coverage and less waste. This can help ensure that no steps are missed and will result in an even better-finished product! Tip #5: Start With the Railingīefore staining your deck boards, it’s a good idea to first stain wood railings. Tip #4: Watch a Tutorial Video Before You Stainīefore you begin staining your deck, it is a good idea to watch a video of the process so that you have a visual reference.
If possible, try to schedule their naptime or have someone take them for a walk so they aren’t underfoot while you are working on this project. Make sure that you keep little ones out of the way when staining a deck. Tip #3: Keep the Little Ones Out of the Way A good bristle brush can help ensure that stains are applied evenly and without brush strokes, which can lead to a much better-looking finished product. Make sure you have a high-quality paintbrush available for your stain project, as it will save you both time and money in the end. Tip #2: Don’t Forget the Brush – It Will Save You Time and Money! If the temperatures are too far gone, make sure to reschedule your project date. It is best to wait until temperatures are in the low 70s and there isn’t any chance of rain or thunderstorms for at least 24 hours after you’ve applied the stain. Tip #1: Don’t Do the Project on a Hot Day – Go to the Beach Insteadĭo not do the project on a hot day if possible.
0 kommentar(er)
